VAIO PCG-R505R/GK にOpenBSD4.0を導入したんだけどX起動しようとしたら落ちる 以下dmesge OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006 deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium III ("GenuineIntel" 686-class) 845 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real mem = 400580608 (391192K) avail mem = 357195776 (348824K) using 4256 buffers containing 20131840 bytes (19660K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(8e) BIOS, date 08/15/02, BIOS32 rev. 0 @ 0xfd878, SMBIOS rev. 2.31 @ 0xd8010 (14 entries) bios0: Sony Corporation PCG-R505R_GK(J)
643 名前：名無しさん＠お腹いっぱい。 [2006/11/05(日) 18:02:56 ]
apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 30102 dobusy 0 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xfd860/0x7a0 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00) pcibios0: PCI bus #2 is the last bus bios0: ROM list: 0xc0000/0xc000 0xd8000/0x4000! 0xdc000/0x4000! cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x11: rng active, 8Kb/sec vga1 at pci0 dev 2 function 0 "Intel 82815 Graphics" rev 0x11: aperture at 0xf8000000, size 0x4000000 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x03 pci1 at ppb0 bus 1 "TI TSB43AA22 FireWire" rev 0x02 at pci1 dev 0 function 0 not configured cbb0 at pci1 dev 2 function 0 "Ricoh 5C475 CardBus" rev 0x80pci_intr_map: no mapping for pin A : couldn't map interrupt fxp0 at pci1 dev 8 function 0 "Intel 82562" rev 0x03, i82562: irq 9, address 08:00:46:17:d6:6a inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0 ichpcib0 at pci0 dev 31 function 0 "Intel 82801BAM LPC" rev 0x03: SpeedStep pciide0 at pci0 dev 31 function 1 "Intel 82801BAM IDE" rev 0x03: DMA, channel 0 wired to compatibility, channel 1 wired to com patibility
644 名前：名無しさん＠お腹いっぱい。 [2006/11/05(日) 18:04:27 ]
wd0 at pciide0 channel 0 drive 0: <HTS541080G9AT00> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 pciide0: channel 1 disabled (no drives) uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x03: irq 9 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ichiic0 at pci0 dev 31 function 3 "Intel 82801BA SMBus" rev 0x03: irq 9
iic0 at ichiic0 uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x03: irq 9 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered auich0 at pci0 dev 31 function 5 "Intel 82801BA AC97" rev 0x03: irq 9, ICH2 AC97 ac97: codec id 0x41445348 (Analog Devices AD1881A) ac97: codec features headphone, Analog Devices Phat Stereo audio0 at auich0 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom0: console
# startx した状態 xauth: creating new authority file /root/.serverauth.23106
X Window System Version 6.9.0 (for OpenBSD) Release Date: 21 December 2005 X Protocol Version 11, Revision 0, Release 6.9 Build Operating System: OpenBSD 4.0 i386 [ELF] Current Operating System: OpenBSD gk.r505r 4.0 GENERIC#1107 i386 Build Date: 13 September 2006 Before reporting problems, check wiki.X.Org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 5 18:06:48 2006 (EE) Unable to locate/open config file X: priv_init: open /dev/pci: Operation not permitted xf86PciVideoInfo is not set (==) Using default built-in configuration (43 lines) (EE) Failed to load module "fbdev" (module does not exist, 0) (EE) No devices detected.
間違えた。 # startx xauth: creating new authority file /root/.serverauth.29768
X Window System Version 6.9.0 (for OpenBSD) Release Date: 21 December 2005 X Protocol Version 11, Revision 0, Release 6.9 Build Operating System: OpenBSD 4.0 i386 [ELF] Current Operating System: OpenBSD gk.r505r 4.0 GENERIC#1107 i386 Build Date: 13 September 2006 Before reporting problems, check wiki.X.Org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 5 18:12:14 2006 (==) Using config file: "/etc/X11/xorg.conf" X: priv_init: open /dev/pci: Operation not permitted (EE) No devices detected.
Fatal server error: no screens found
Please consult the The X.Org Foundation support at wiki.X.Org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information.
X connection to :0.0 broken (explicit kill or server shutdown).
