>>206 Linux version 2.4.2-2 (root@porky.devel.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-79)) #1 Sun Apr 8 20:41:30 EDT 2001 BIOS-provided physical RAM map: BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable) BIOS-e820: 0000000000000400 @ 000000000009fc00 (reserved) BIOS-e820: 0000000000020000 @ 00000000000e0000 (reserved) BIOS-e820: 0000000007dc0000 @ 0000000000100000 (usable) BIOS-e820: 0000000000018000 @ 0000000007ee0000 (ACPI data) BIOS-e820: 0000000000008000 @ 0000000007ef8000 (ACPI NVS) BIOS-e820: 0000000000020000 @ 0000000007ec0000 (ACPI data) BIOS-e820: 0000000000080000 @ 00000000ffb80000 (reserved) BIOS-e820: 0000000000100000 @ 00000000fff00000 (reserved) On node 0 totalpages: 32448 zone(0): 4096 pages. zone DMA has max 32 cached pages. zone(1): 28352 pages. zone Normal has max 221 cached pages. zone(2): 0 pages. zone HighMem has max 1 cached pages. Kernel command line: auto BOOT_IMAGE=linux ro root=308 BOOT_FILE=/boot/vmlinuz-2.4.2-2 Initializing CPU#0 Detected 697.752 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1392.64 BogoMIPS Memory: 125216k/129792k available (1365k kernel code, 4188k reserved, 92k data, 236k init, 0k highmem) Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) VFS: Diskquotas version dquot_6.5.0 initialized CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000 CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 CPU: Common caps: 0383f9ff 00000000 00000000 00000000 CPU: Intel Celeron (Coppermine) stepping 06
209 名前：197 [01/12/27 16:19 ID:/Pla38Ec]
Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.37 (20001109) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/2410] at 00:1f.0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14) Starting kswapd v1.8 pty: 256 Unix98 ptys configured block: queued sectors max/low 83072kB/27690kB, 256 slots per queue RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev f9 PIIX4: chipset revision 2 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: ST320413A, ATA DISK drive hdc: Lite-On LTN486 48x Max, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 39102336 sectors (20020 MB) w/512KiB Cache, CHS=2434/255/63, UDMA(66) Partition check: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Serial driver version 5.02 (2000-08-09) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A Real Time Clock Driver v1.10d md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md.c: sizeof(mdp_super_t) = 4096 autodetecting RAID arrays autorun ... ... autorun DONE.
210 名前：197 [01/12/27 16:19 ID:/Pla38Ec]
NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 8192) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 236k freed Adding Swap: 265032k swap-space (priority -1) usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.251 $ time 20:53:29 Apr 8 2001 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 9 for device 00:1f.2 PCI: The same IRQ used for device 01:0b.0 PCI: Setting latency timer of device 00:1f.2 to 64 usb-uhci.c: USB UHCI at I/O 0xef80, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ... SMSC Super-IO detection, now testing Ports 2F0, 370 ... 0x378: FIFO is 16 bytes 0x378: writeIntrThreshold is 8 0x378: readIntrThreshold is 8 0x378: PWord is 8 bits 0x378: Interrupts are ISA-Pulses 0x378: ECP port cfgA=0x10 cfgB=0x4b 0x378: ECP settings irq=7 dma=3 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,ECP] parport0: irq 7 detected parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) via-rhine.c:v1.08b-LK1.1.7 8/9/2000 Written by Donald Becker www.scyld.com/network/via-rhine.html PCI: Found IRQ 3 for device 01:0a.0
211 名前：197 [01/12/27 16:20 ID:/Pla38Ec]
eth0: VIA VT3043 Rhine at 0xdc00, 00:40:05:37:32:30, IRQ 3. eth0: reset did not complete in 10 ms. eth0: MII PHY found at address 8, status 0x782d advertising 05e1 Link 0000. PCI: Found IRQ 9 for device 01:0b.0 PCI: The same IRQ used for device 00:1f.2 eth1: VIA VT6102 Rhine-II at 0xd800, 00:90:99:24:06:56, IRQ 9. eth1: reset did not complete in 10 ms. eth1: MII PHY found at address 8, status 0x7809 advertising 01e1 Link 0000. Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 93M agpgart: Detected an Intel i810 E Chipset. agpgart: detected 4MB dedicated video ram. agpgart: AGP aperture is 64M @ 0xf8000000 [drm] AGP 0.99 on Intel i810 @ 0xf8000000 64MB [drm] Initialized i810 1.1.0 20000928 on minor 63 mtrr: base(0xf8000000) is not aligned on a size(0x180000) boundary hdc: ATAPI 48X CD-ROM drive, 120kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Uniform CD-ROM driver unloaded hdc: ATAPI 48X CD-ROM drive, 120kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 eth0: Setting full-duplex based on MII #8 link partner capability of 45e1.
PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/2410] at 00:1f.0
eth0: VIA VT3043 Rhine at 0xdc00, 00:40:05:37:32:30, IRQ 3. eth0: reset did not complete in 10 ms. eth0: MII PHY found at address 8, status 0x782d advertising 05e1 Link 0000. PCI: Found IRQ 9 for device 01:0b.0 PCI: The same IRQ used for device 00:1f.2 eth1: VIA VT6102 Rhine-II at 0xd800, 00:90:99:24:06:56, IRQ 9. eth1: reset did not complete in 10 ms. eth1: MII PHY found at address 8, status 0x7809 advertising 01e1 Link 0000.
