- 346 名前：login:Penguin mailto:sage [2011/05/30(月) 20:21:15.86 ID:jKN4sEWf]
- >>341
ごめんなさい。kernelの機動オプションの与え方を間違えていました。
やり直してみたけどこれでいいのですよね?
$ cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=458e9caa-e257-44d9-8aaa-14cc1ca6dbf0 ro vga=773 quiet splash vt.handoff=7 pnpbios=off pci=bios noapic
でも、dmesgに出力される内容はあまり変わらないみたいです。
[ 172.428082] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 172.428152] pci 0000:02:00.0: [11ab:2a0b] type 0 class 0x000200
[ 172.428216] pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xd000ffff]
[ 172.428253] pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xc000ffff]
[ 172.428457] pci 0000:02:00.0: BAR 0: assigned [mem 0x28000000-0x2800ffff]
[ 172.428484] pci 0000:02:00.0: BAR 0: set to [mem 0x28000000-0x2800ffff] (PCI address [0x28000000-0x2800ffff])
[ 172.428506] pci 0000:02:00.0: BAR 1: assigned [mem 0x28010000-0x2801ffff]
[ 172.428531] pci 0000:02:00.0: BAR 1: set to [mem 0x28010000-0x2801ffff] (PCI address [0x28010000-0x2801ffff])
[ 172.458791] ndiswrapper: driver netag3n (BUFFALO INC.,05/21/2007, 3.0.1.13) loaded
[ 172.459956] ndiswrapper 0000:02:00.0: enabling device (0000 -> 0002)
[ 172.460004] ndiswrapper 0000:02:00.0: PCI INT A -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9
[ 172.477507] ndiswrapper: using IRQ 9
[ 172.997222] wlan0: ethernet device 00:16:01:72:92:c9 using NDIS driver: netag3n, version: 0x300010d, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 11AB:2A0B.5.conf
[ 172.997401] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 173.060915] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 193.592064] ndiswrapper (set_scan:1186): scanning failed (C0000001)
[ 223.588057] ndiswrapper (set_scan:1186): scanning failed (C0000001)
|
 |
