おまえの hddparm -tT 教えてください。

おまえの hddparm -tT ..

186:login:Penguin
04/01/17 23:43 RKIrLYDw
Model=IC35L080AVVA07-0, FwRev=VA4OA52A, SerialNo=VNC402A4CP9LRA
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52
BuffType=DualPortCache, BuffSize=1863kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=160836480
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1:

* signifies the current active mode

Timing buffer-cache reads: 1520 MB in 2.00 seconds = 760.00 MB/sec
Timing buffered disk reads: 138 MB in 3.04 seconds = 45.39 MB/sec
なぜか udma3 udma4 udma5 が出ないけど，UDMA(100)とdmesgには出てる
kernel 2.4.22で，dmesgには
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
hda: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=10011/255/63, UDMA(100)
とあるんだけども。

187:login:Penguin
04/01/20 02:51 W3E7xBCZ
Model=WDC WD740GD-00FLA0, FwRev=21.08U21, SerialNo=WD-WMAKE1006441
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=74
BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=145226112
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version:
Timing buffer-cache reads: 2104 MB in 2.00 seconds = 1052.00 MB/sec
Timing buffered disk reads: 178 MB in 3.01 seconds = 59.14 MB/sec

Model=ST3120026AS, FwRev=3.05, SerialNo=3JT0LQ15
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=234441648
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2:
Timing buffer-cache reads: 2116 MB in 2.00 seconds = 1058.00 MB/sec
Timing buffered disk reads: 74 MB in 3.00 seconds = 24.67 MB/sec

Seagageだめぽ

188:login:Penguin
04/01/20 06:04 /aP5txjp
# /sbin/hdparm -tT /dev/hda
/dev/hda:
Timing buffer-cache reads: 128 MB in 1.06 seconds =120.75 MB/sec
Timing buffered disk reads: 64 MB in 2.11 seconds = 30.33 MB/sec
# cat /proc/ide/hda/model
ACCUSYS ACS7500 1.2

189:login:Penguin
04/02/01 19:56 AMl1hFRp
Model=Maxtor 6Y120L0, FwRev=YAR41BW0, SerialNo=Y3JAZLLE
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=240121728
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: (null):

* signifies the current active mode

Timing buffer-cache reads: 3152 MB in 2.00 seconds = 1576.00 MB/sec
Timing buffered disk reads: 158 MB in 3.01 seconds = 52.49 MB/sec

190:login:Penguin
04/02/27 01:20 UUOmZDvD
/dev/hdb:

Model=IBM-DTLA-307020, FwRev=TX3OA50C, SerialNo=YHDYHT6F813
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40
BuffType=DualPortCache, BuffSize=1916kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=40188960
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1:

Timing buffer-cache reads: 2892 MB in 2.00 seconds = 1446.00 MB/sec
Timing buffered disk reads: 106 MB in 3.03 seconds = 34.98 MB/sec

191:login:Penguin
04/02/27 01:36 JZQi2dgV
/dev/sda:
Timing buffer-cache reads: 656 MB in 2.01 seconds = 326.58 MB/sec
Timing buffered disk reads: 48 MB in 3.02 seconds = 15.90 MB/sec
USB接続のディスク
本体にUSB1.1用ポートもあるが、恐くて試す気にはならない

192:login:Penguin
04/03/20 23:16 q8sPqx2g
/dev/hda:

Model=ST3120026A, FwRev=3.16, SerialNo=3JT0HTQN
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=234375000
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2:

/dev/hda:
Timing buffer-cache reads: 2368 MB in 2.00 seconds = 1184.18 MB/sec
Timing buffered disk reads: 168 MB in 3.02 seconds = 55.58 MB/sec

193:login:Penguin
04/04/26 09:24 6IcgBNQo
アゲ

194:login:Penguin
04/04/26 23:46 1ND8tNEF
$ /sbin/hdparm -tT /dev/hda
/dev/hda: Permission denied

195:login:Penguin
04/04/26 23:50 1ND8tNEF
/dev/hda:
Timing buffer-cache reads: 128 MB in 1.44 seconds = 88.89 MB/sec
Timing buffered disk reads: 64 MB in 15.61 seconds = 4.10 MB/sec
$ cat /proc/ide/hda/model
Maxtor 6Y200P0
みんな速いなぁ

196:191
04/04/27 00:13 hW9dvw/i
USB1.1接続にして測定してみたぞ
/dev/sdc:
Timing buffer-cache reads: 700 MB in 2.01 seconds = 348.83 MB/sec
Timing buffered disk reads: 4 MB in 4.24 seconds = 966.64 kB/sec

はじめはうかつにも曲聞きながら(USB Audio,48kHz 16bit)チャレンジしたら
I/O Error となってしまった。曲を止めて気をとりなおしてチャレンジ

197:login:Penguin
04/04/28 21:02 hJLArAS4
$ cat /proc/ide/hda/model
FUJITSU MHT2040AT SP

$ cat /proc/ide/hdc/model
UJDA750 DVD/CDRW

198:197
04/04/28 21:05 hJLArAS4
/dev/hda:
Timing buffer-cache reads: 752 MB in 2.00 seconds = 375.12 MB/sec
Timing buffered disk reads: 82 MB in 3.00 seconds = 27.30 MB/sec

199:名無しさん＠お腹いっぱい
04/04/28 23:12 DRMgIbr2
/dev/hda:
Timing buffer-cache reads: 128 MB in 0.38 seconds =336.84 MB/sec
Timing buffered disk reads: 64 MB in 1.13 seconds = 56.64 MB/sec

200:login:Penguin
04/04/28 23:48 yxz9XbxE
# cat /proc/ide/hda/model
Maxtor 6Y080L0
/dev/hda:
Timing buffer-cache reads: 128 MB in 0.46 seconds =278.26 MB/sec
Timing buffered disk reads: 64 MB in 1.14 seconds = 56.14 MB/sec

201:login:Penguin
04/04/29 00:18 o9I+Kw0G
# cat /proc/ide/hda/model
ST3120026A
/dev/hda:
Timing buffer-cache reads: 1648 MB in 2.00 seconds = 823.18 MB/sec
Timing buffered disk reads: 140 MB in 3.04 seconds = 46.04 MB/sec

202:login:Penguin
04/04/29 01:38 lbw9OBWT
# cat /proc/ide/hda/model
Maxtor 6Y080L0

/dev/hda:
Timing buffer-cache reads: 1124 MB in 2.00 seconds = 562.00 MB/sec
Timing buffered disk reads: 172 MB in 3.01 seconds = 57.14 MB/sec

203:login:Penguin
04/04/29 11:20 NX2S7b8D
FUJITSU MPB3032ATU,ATA DISK Drive

/dev/hda:
Timing buffer-cache reads: 128 MB in 10.14 seconds = 12.62 MB/sec
Timing buffered disk reads: 64 MB in 22.72 seconds = 2.82 MB/sec

204:login:Penguin
04/05/01 16:11 rQ3OkBYf
cat /proc/ide/hda/model
Maxtor 6Y060L0

/dev/hda
Timing buffer-cache reads: 1732 MB in 2.00 seconds = 866.00 MB/sec
Timing buffered disk reads: 146 MB in 3.04 seconds = 48.11 MB/sec

遅いのか早いのかよくわかりません

205:login:Penguin
04/05/22 16:33 affgRXsr
/dev/hda:

Model=HDS722516VLAT80, FwRev=V34OA60A, SerialNo=
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52
BuffType=DualPortCache, BuffSize=7938kB, MaxMultSect=16, MultSect=16
CurCHS=65535/1/63, CurSects=4128705, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a:

* signifies the current active mode

Timing buffer-cache reads: 424 MB in 2.01 seconds = 211.40 MB/sec
Timing buffered disk reads: 136 MB in 3.02 seconds = 45.10 MB/sec

206:login:Penguin
04/05/22 16:34 affgRXsr
/dev/hdc:

Model=ST3160023A, FwRev=3.06, SerialNo=
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2:

* signifies the current active mode

Timing buffer-cache reads: 440 MB in 2.00 seconds = 219.59 MB/sec
Timing buffered disk reads: 106 MB in 3.04 seconds = 34.90 MB/sec

207:login:Penguin
04/06/27 22:35 cjacHE9B
hda と hdcでだいぶ違うのをハケーン。
DMA on なんだけど。

/dev/hda:

Model=Maxtor 6Y080L0, FwRev=YAR41BW0, SerialNo=Y288LDDE
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156250000
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: (null): 1 2 3 4 5 6 7

Timing buffer-cache reads: 128 MB in 0.37 seconds =346.00 MB/sec
Timing buffered disk reads: 64 MB in 5.86 seconds = 10.92 MB/sec

208:login:Penguin
04/06/27 22:35 cjacHE9B
/dev/hdc:

Model=Maxtor 6Y080L0, FwRev=YAR41BW0, SerialNo=Y2875BJE
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156250000
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: (null): 1 2 3 4 5 6 7

Timing buffer-cache reads: 128 MB in 0.36 seconds =354.62 MB/sec
Timing buffered disk reads: 64 MB in 1.13 seconds = 56.45 MB/sec

209:login:Penguin
04/07/04 11:02 M3VVZWpG
# cat /proc/ide/hda/model
HITACHI_DK23FB-40

# hdparm -tT
Timing buffer-cache reads : 128MB in 0.84 seconds =152.38 MB/sec
Timing buffered disk reads: 64MB in 13.25 seconds = 4.83 MB/sec

210:login:Penguin
04/07/04 13:33 1zxrVlAj
Model=WDC WD740GD-00FLA0, FwRev=21.08U21, SerialNo=WD-WMAKE1006441
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=74
BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=65535/1/63, CurSects=4128705, LBA=yes, LBAsects=145226112
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version:

* signifies the current active mode

Timing buffer-cache reads: 1924 MB in 2.00 seconds = 961.18 MB/sec
Timing buffered disk reads: 204 MB in 3.02 seconds = 67.60 MB/sec

211: ◆Zsh/ladOX.
04/07/04 19:01 BHrpEmCI
>>210
漏れもﾗﾌﾟﾀｿ2使ってるけどその位の速度。
速くて快適だ…

# hdparm -tiT /dev/hde

/dev/hde:

Model=WDC WD740GD-00FLA0, FwRev=21.08U21, SerialNo=WD-WMAKE10603XX
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=74
BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=65535/1/63, CurSects=4128705, LBA=yes, LBAsects=145226112
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version:

* signifies the current active mode

Timing buffer-cache reads: 2072 MB in 2.00 seconds = 1035.12 MB/sec
Timing buffered disk reads: 206 MB in 3.02 seconds = 68.18 MB/sec

212:ThinkPad 570
04/07/05 20:26 AlS/ZVbg
HITACHI_DK23DA_16N

Timing buffer-cache reads: 128MB in 1.44 seconds = 88.89 MB/sex
Timing buffered disk reads: 64MB in 4.59 seconds = 13.94 MB/sec

213:login:Penguin
04/07/06 20:58 FqTqA7xx
FUJITSU MAS3367NP

Timing buffer-cache reads: 4044MB in 2.00 seconds = 2021.30 MB/sex
Timing buffered disk reads: 226MB in 3.01 seconds = 75.04 MB/sec

214:login:Penguin
04/07/06 23:00 smyET8Ni
>>212
>>213
Timing buffer-cacheの行の単位がMB/sexになってるぞ!!

215:logon:windows
04/07/10 12:16 JBxFliL3
'hddparm' は、内部コマンドまたは外部コマンド、
操作可能なプログラムまたはバッチファイルとして認識されていません。

216:login:Penguin
04/07/21 14:05 lMuFrjOX
# cat /proc/ide/hda/model
IBM-DTTA-350840

# /sbin/hdparm -tT /dev/hda

/dev/hda:
Timing buffer-cache reads: 128 MB in 0.98 seconds =130.61 MB/sec
Timing buffered disk reads: 64 MB in 6.21 seconds = 10.31 MB/sec

遅いなぁ・・・P3-500じゃこんなものか

217:login:Penguin
04/07/27 20:11 iBM75hGT
Timing buffer-cache reads: 3420 MB in 2.00 seconds = 1709.41 MB/sec
Timing buffered disk reads: 192 MB in 3.00 seconds = 63.92 MB/sec

速いのかな?

218:login:Penguin
04/07/27 20:30 FGsTH/4M
>>217
チップセット何？

219:217
04/07/27 20:57 iBM75hGT
>218
ICH5 S-ATAなHDD

220:login:Penguin
04/07/27 21:09 AyEVRNqe
$ cat /proc/ide/hda/model
ST340810A
$ /sbin/h
halt hwclock
$ sudo apt-get install hdparm
[...]
Setting up hdparm (4.5-1.2) ...

$ sudo /sbin/hdparm -tT /dev/hda

/dev/hda:
Timing buffer-cache reads: 128 MB in 1.96 seconds = 65.31 MB/sec
Timing buffered disk reads: 64 MB in 9.50 seconds = 6.74 MB/sec

221:login:Penguin
04/08/26 03:01 WYFof0ZU
]# hdparm -tiT /dev/hda

/dev/hda:

Model=HTS726060M9AT00, FwRev=MH4OA68A, SerialNo=MRH401M4G5JHZB
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=DualPortCache, BuffSize=7877kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=117210240
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: mode=0x80 (128) WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a:

* signifies the current active mode

Timing buffer-cache reads: 1984 MB in 2.00 seconds = 993.14 MB/sec
Timing buffered disk reads: 110 MB in 3.03 seconds = 36.31 MB/sec

222:login:Penguin
04/08/28 13:56 yEv2JopM
iオプション付けた方が見栄えするな

223:216
04/09/18 18:31:45 LQFrKIPy
CPUをP3-500からCeleron 500に変えたんでもう一度晒し。
# /sbin/hdparm -tiT /dev/hda

/dev/hda:

Model=IBM-DTTA-350840, FwRev=T55OA73A, SerialNo=WE0WEH11545
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=34
BuffType=DualPortCache, BuffSize=467kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=16514064
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 *udma2
AdvancedPM=no WriteCache=enabled
Drive Supports : ATA/ATAPI-4 T13 1153D revision 17 : ATA-1 ATA-2 ATA-3 ATA-4

Timing buffer-cache reads: 128 MB in 1.64 seconds = 78.05 MB/sec
Timing buffered disk reads: 64 MB in 6.75 seconds = 9.48 MB/sec

FSBの差は大きいな。

224:login:Penguin
04/09/20 23:17:46 kkqOBezI
Virtual マシンに入れた Fedora Core 1

$ sudo /sbin/hdparm -tiT /dev/hda
Password:

/dev/hda:

Model=Virtual HD, FwRev=1. 1, SerialNo=
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=32256, SectSize=512, ECCbytes=0
BuffType=DualPortCache, BuffSize=64kB, MaxMultSect=128, MultSect=128
CurCHS=33288/16/63, CurSects=33554304, LBA=yes, LBAsects=33554304
IORDY=on/off, tPIO={min:333,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 *mdma2
AdvancedPM=no

* signifies the current active mode

Timing buffer-cache reads: 496 MB in 1.99 seconds = 249.25 MB/sec
Timing buffered disk reads: 44 MB in 3.06 seconds = 14.38 MB/sec

225:216
04/09/28 20:07:54 /8cKNkSa
i840+P3-500MHzマシン

# /sbin/hdparm -tiT /dev/hda

/dev/hda:

Model=Maxtor 90680D4, FwRev=PAS23B15, SerialNo=V417RWVA
Config={ Fixed }
RawCHS=13176/16/63, TrkSize=0, SectSize=0, ECCbytes=29
BuffType=DualPortCache, BuffSize=256kB, MaxMultSect=16, MultSect=16
CurCHS=13176/16/63, CurSects=13281408, LBA=yes, LBAsects=13281408
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2
AdvancedPM=no WriteCache=enabled
Drive Supports : ATA/ATAPI-4 T13 1153D revision 17 : ATA-1 ATA-2 ATA-3 ATA-4

Timing buffer-cache reads: 128 MB in 0.93 seconds =137.63 MB/sec
Timing buffered disk reads: 64 MB in 5.18 seconds = 12.36 MB/sec

226:login:Penguin
04/10/04 03:35:18 +I4jJv/F
玄人志向のATA133RAID-PCI2につないだHDS722516VLAT80(非RAID)

/dev/sda:
Timing buffer-cache reads: 128 MB in 1.27 seconds =100.79 MB/sec
Timing buffered disk reads: 64 MB in 1.92 seconds = 33.33 MB/sec

カードのBIOSではUDMA5だけどATA33で飽和してるっぽい。
scsi認識だから-iで情報見られないし、-d1は効かないしなぁ。

227:login:Penguin
04/10/16 20:06:09 KQkmWF+V
IC35L180AVV207-1
Timing buffer-cache reads: 1092 MB in 2.00 seconds = 544.72 MB/sec
Timing buffered disk reads: 156 MB in 3.05 seconds = 51.09 MB/sec

Maxtor 6Y200P0
Timing buffer-cache reads: 1048 MB in 2.00 seconds = 524.08 MB/sec
Timing buffered disk reads: 174 MB in 3.02 seconds = 57.62 MB/sec

まぁこんなもんか。

>>213 の MAS とか >>217 の Raptor(?) とかはやっぱり桁違いに速い
ですね。

今年発表された各社の威信を賭けたハイエンドSCSI新モデル群は
何処まで逝くか楽しみですな。

228:login:Penguin
04/11/29 01:11:41 OHYE34d1
/sbin/hdparm -tiT /dev/hda

/dev/hda:

Model=ST313620A, FwRev=3.07, SerialNo=7BW11BTT
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=unknown, BuffSize=512kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=26692776
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4
AdvancedPM=no WriteCache=enabled
Drive Supports : Reserved : ATA-1 ATA-2 ATA-3 ATA-4

Timing buffer-cache reads: 128 MB in 1.16 seconds =110.34 MB/sec
Timing buffered disk reads: 64 MB in 2.56 seconds = 25.00 MB/sec

pentium2 450x2 + 初代BarracudaATA 13.6GB

229:記念真紀子
04/12/09 23:54:50 lWm7XnM7
DellPowerEdge400SC+FedoraCore1+linux-2.4.26

/dev/hdb:

Model=ST3200822A, FwRev=3.01, SerialNo=
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=65535/1/63, CurSects=4128705, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2:

* signifies the current active mode

Timing buffer-cache reads: 2472 MB in 2.00 seconds = 1236.00 MB/sec
Timing buffered disk reads: 186 MB in 3.00 seconds = 62.00 MB/sec

230:76
04/12/10 23:15:40 e3/dWnM9
同じノートをまだ使っているが
半年ほど前にHDDを換えてみた(40G→80G)
回転数も上がったから多少は速くなっているかも
/dev/hda:

Model=HTS548080M9AT00, FwRev=MG4OA53A, SerialNo=MRL422L4GK498B
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=DualPortCache, BuffSize=7877kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156301488
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: mode=0x80 (128) WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a:

* signifies the current active mode

Timing cached reads: 664 MB in 2.00 seconds = 331.55 MB/sec
Timing buffered disk reads: 110 MB in 3.05 seconds = 36.04 MB/sec

231:login:Penguin
04/12/17 00:35:35 Q3z0jJ+F
i815 + PenIII-S1.4GHz + linux-2.6.9-gentoo-r6
静かで涼しい、俺の大好きなHDD　現在25°C
/dev/hda:

Model=ST340015A, FwRev=3.01, SerialNo=5LA7VAT5
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=78165360
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version:

* signifies the current active mode

Timing cached reads: 624 MB in 2.01 seconds = 311.11 MB/sec
Timing buffered disk reads: 130 MB in 3.02 seconds = 43.02 MB/sec

232:login:Penguin
04/12/22 02:30:23 zF3llWza
薔薇5400っすか

233:login:Penguin
05/01/11 19:33:17 jgQC2NXl
/dev/hda:

Model=IBM-DJNA-351520, FwRev=J56OA30K, SerialNo=G80GLWHN168
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=34
BuffType=DualPortCache, BuffSize=430kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=30033360
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2 udma3 udma4
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-4 T13 1153D revision 17: 1 2 3 4

Timing buffer-cache reads: 128 MB in 1.34 seconds = 95.52 MB/sec
Timing buffered disk reads: 64 MB in 4.42 seconds = 14.48 MB/sec

234:login:Penguin
05/01/23 22:49:42 o7FAQxHE
/dev/hda:

Model=HDS728040PLAT20, FwRev=PF1OA21B, SerialNo=PFD112S1RWBWUD
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=51
BuffType=DualPortCache, BuffSize=1719kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=80418240
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: Reserved:

* signifies the current active mode

Timing cached reads: 1328 MB in 2.00 seconds = 663.44 MB/sec
Timing buffered disk reads: 148 MB in 3.03 seconds = 48.87 MB/sec

235:login:Penguin
05/01/23 23:15:18 3lhJV5IM
model: HDS722512VLAT80
/dev/hda:
Timing buffer-cache reads: 628 MB in 2.00 seconds = 314.00 MB/sec
Timing buffered disk reads: 174 MB in 3.02 seconds = 57.62 MB/sec

model: Maxtor 6Y120P0
/dev/hdb:
Timing buffer-cache reads: 620 MB in 2.00 seconds = 310.00 MB/sec
Timing buffered disk reads: 144 MB in 3.03 seconds = 47.52 MB/sec

model: Maxtor 6Y120P0
/dev/hdd:
Timing buffer-cache reads: 620 MB in 2.00 seconds = 310.00 MB/sec
Timing buffered disk reads: 146 MB in 3.01 seconds = 48.50 MB/sec

３台とも静穏モードだけど、hdaの日立（IBM）は設計が新しいだけあって速いみたいだな。
ソフトウェアraidドライバとかnfsとかsambaとか動かしたまま

236:login:Penguin
05/01/25 21:19:46 xOZFV118
# cat /proc/ide/hda/model;hdparm -tT /dev/hda
IBM-DTLA-307045

/dev/hda:
Timing buffer-cache reads: 128 MB in 0.93 seconds =137.63 MB/sec
Timing buffered disk reads: 64 MB in 2.57 seconds = 24.90 MB/sec

# cat /proc/ide/hdc/model;hdparm -tT /dev/hdc
WDC WD400BB-75FRA0

/dev/hdc:
Timing buffer-cache reads: 128 MB in 0.93 seconds =137.63 MB/sec
Timing buffered disk reads: 64 MB in 2.73 seconds = 23.44 MB/sec

237:login:Penguin
05/01/27 00:27:17 svgkgAWc
# cat /proc/ide/hda/model;hdparm -tT /dev/hda
Maxtor 6Y120L0

/dev/hda:
Timing cached reads: 1904 MB in 2.00 seconds = 950.72 MB/sec
Timing buffered disk reads: 146 MB in 3.04 seconds = 48.07 MB/sec

238:login:Penguin
05/02/01 22:39:08 irHVdbVR
/dev/hda:

Model=ST380011A, FwRev=8.01, SerialNo=5JVEGW6M
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156295279
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2:

* signifies the current active mode

Timing cached reads: 2536 MB in 2.00 seconds = 1267.56 MB/sec
Timing buffered disk reads: 166 MB in 3.01 seconds = 55.10 MB/sec

＃　このスレみて自分のドライブが異様に遅いのに気付くまで、
＃　ケーブルが古い４０芯でUDMA-33で動作してるのに気付かなかった
＃
＃　ちなみに同じドライブでこれぐらいだった↓
＃　Timing cached reads: = 250 MB/sec
＃ Timing buffered disk reads: = 28 MB/sec

239:中古格安ディスク
05/02/28 04:46:35 w7Vpyt1I
/dev/hda:

Model=ST36422A, FwRev=1.70, SerialNo=7AC01TSV
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=13228/15/63, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=unknown, BuffSize=256kB, MaxMultSect=16, MultSect=16
CurCHS=13228/15/63, CurSects=12500460, LBA=yes, LBAsects=12500460
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version: 1 2 3 4

* signifies the current active mode

/dev/hda:
Timing cached reads: 532 MB in 2.00 seconds = 266.00 MB/sec
Timing buffered disk reads: 42 MB in 3.03 seconds = 13.86 MB/sec

カタカタうるさいディスク、

240:login:Penguin
05/02/28 04:52:54 YIgGQUqd
僕のｼﾝｺﾊﾟｯﾄﾞでつ。

# hdparm -tT /dev/hda1

/dev/hda1:
Timing cached reads: 620 MB in 2.01 seconds = 308.20 MB/sec
Timing buffered disk reads: 70 MB in 3.04 seconds = 23.01 MB/sec

HDDを買い換えて2ﾏｿしたっす。2ﾏｿ払った成果はあるようです。

241:login:Penguin
05/02/28 22:26:51 jxUmjyKI
/dev/hdd:

Model=QUANTUM FIREBALL EX6.4A, FwRev=A0A.0D00, SerialNo=276903422458
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=13325/15/63, TrkSize=32256, SectSize=21298, ECCbytes=4
BuffType=DualPortCache, BuffSize=418kB, MaxMultSect=16, MultSect=16
CurCHS=13325/15/63, CurSects=12592125, LBA=yes, LBAsects=12592847
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-4 T13 1153D revision 15: 1 2 3 4

* signifies the current active mode

Timing cached reads: 2432 MB in 2.00 seconds = 1214.36 MB/sec
Timing buffered disk reads: 38 MB in 3.03 seconds = 12.54 MB/sec

5年ぐらい前のHDだが、まあ歳相応の性能ってところか。

242:login:Penguin
05/03/01 22:52:55 4CiTp4tI
# hdparm -iTt /dev/hde [~]

/dev/hde:

Model=WDC WD740GD-00FLA1, FwRev=27.08D27, SerialNo=WD-WMAKE1601147
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=74
BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=145226112
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version:

* signifies the current active mode

Timing cached reads: 2096 MB in 2.00 seconds = 1047.11 MB/sec
Timing buffered disk reads: 204 MB in 3.03 seconds = 67.38 MB/sec

なんで cached read がやたら遅いんだろう。

243:login:Penguin
05/03/02 00:24:13 iGyotS9C
# hdparm -tiT /dev/hda

/dev/hda:

Model=QUANTUM FIREBALL ST3.2A, FwRev=A0F.F800, SerialNo=153718315215
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=6256/16/63, TrkSize=32256, SectSize=512, ECCbytes=4
BuffType=DualPortCache, BuffSize=81kB, MaxMultSect=16, MultSect=16
CurCHS=6256/16/63, CurSects=6306048, LBA=yes, LBAsects=6306048
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 *mdma2
UDMA modes: udma0 udma1 udma2
AdvancedPM=no
Drive conforms to: device does not report version: 1 2 3

* signifies the current active mode

Timing cached reads: 116 MB in 2.04 seconds = 56.86 MB/sec
Timing buffered disk reads: 28 MB in 3.15 seconds = 8.89 MB/sec

とっても遅いづら。

244:login:Penguin
05/03/07 16:31:25 YpnTrMh/
RAID組んで測っているのは無いんか？

245:login:Penguin
05/03/16 19:53:27 I6NMpJMw
# hdparm -itT /dev/hda

/dev/hda:

Model=TOSHIBA MK2103MAV, FwRev=D0.05 A, SerialNo=97874156
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=4200/16/63, TrkSize=40257, SectSize=639, ECCbytes=21
BuffType=DualPortCache, BuffSize=128kB, MaxMultSect=16, MultSect=16
CurCHS=4200/16/63, CurSects=4233600, LBA=yes, LBAsects=4233600
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 *mdma2
AdvancedPM=no
Drive Supports : Reserved : ATA-1 ATA-2 ATA-3

Timing buffer-cache reads: 128 MB in 5.84 seconds = 21.92 MB/sec
Timing buffered disk reads: 64 MB in 27.53 seconds = 2.32 MB/sec

10年前のPentium120MHzノート+東芝2G+Vine2.5で使ってる自宅鯖。(*´▽`*) ｵｿｰｲ

246:login:Penguin
05/03/23 18:36:51 TDALkra/
hdparm -tT /dev/sda10

/dev/sda10:
Timing buffer-cache reads: 128 MB in 0.13 seconds =984.62 MB/sec
Timing buffered disk reads: 64 MB in 0.78 seconds = 82.05 MB/sec

Vendor: DELL Model: Virtual Disk 0 Rev: V1.0
Type: Direct-Access ANSI SCSI revision: 02

247:login:Penguin
05/03/23 21:46:23 2YotQzhg
hdparm -tiT /dev/hda

/dev/hda:

Model=IC35L120AVVA07-0, FwRev=VA6OA52A, SerialNo=VNC603A6GGEZVA
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52
BuffType=DualPortCache, BuffSize=1863kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=241254720
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1:

* signifies the current active mode

Timing cached reads: 1704 MB in 2.00 seconds = 851.28 MB/sec
Timing buffered disk reads: 126 MB in 3.04 seconds = 41.41 MB/sec

248:login:Penguin
05/03/23 22:35:05 2YotQzhg
hdparm -tiT /dev/hda

/dev/hda:

Model=IBM-DYLA-28100, FwRev=YSAAA23H, SerialNo=VC0VC033424
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=15880/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=DualPortCache, BuffSize=459kB, MaxMultSect=16, MultSect=off
CurCHS=15880/16/63, CurSects=16007040, LBA=yes, LBAsects=16007040
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 *mdma2
UDMA modes: udma0 udma1 udma2
AdvancedPM=yes: mode=0x80 (128)
Drive conforms to: ATA-3 X3T10 2008D revision 1: 1 2 3

* signifies the current active mode

Timing cached reads: 232 MB in 2.01 seconds = 115.27 MB/sec
Timing buffered disk reads: 22 MB in 3.04 seconds = 7.24 MB/sec

249:login:Penguin
05/03/25 02:30:03 Whpx7+Zs
/sbin/hdparm -tiT /dev/hda

/dev/hda:

Model=Maxtor 91728D8, FwRev=GAS54112, SerialNo=A80BELHC
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=29
BuffType=DualPortCache, BuffSize=512kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=33750864
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-4 T13 1153D revision 17: 1 2 3 4

* signifies the current active mode

Timing cached reads: 240 MB in 2.00 seconds = 120.00 MB/sec
Timing buffered disk reads: 46 MB in 3.11 seconds = 14.79 MB/sec

250:login:Penguin
05/03/25 13:34:07 5PuW9KV7
/sbin/hdparm -tiT /dev/hda

/dev/hda:

Model=HTS548080M9AT00, FwRev=MG4OA53A, SerialNo=MRL442L4GNDMDB
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=DualPortCache, BuffSize=7877kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156301488
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: mode=0x80 (128) WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a:

* signifies the current active mode

Timing cached reads: 1384 MB in 2.01 seconds = 690.04 MB/sec
Timing buffered disk reads: 104 MB in 3.00 seconds = 34.61 MB/sec

251:login:Penguin
05/03/26 19:02:50 BMdCxAVh
dev/hdb:
Timing cached reads: 816 MB in 2.00 seconds = 407.86 MB/sec
Timing buffered disk reads: 162 MB in 3.05 seconds = 53.19 MB/sec

252:login:Penguin
05/04/03 20:56:13 wKGOKtF/ BE:124047375-##
$ sudo /sbin/hdparm -tiT /dev/hda

/dev/hda:

Model=Virtual HD, FwRev=1. 1, SerialNo=
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=32256, SectSize=512, ECCbytes=0
BuffType=DualPortCache, BuffSize=64kB, MaxMultSect=128, MultSect=128
CurCHS=33288/16/63, CurSects=33554304, LBA=yes, LBAsects=33554304
IORDY=on/off, tPIO={min:333,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 *mdma2
AdvancedPM=no

* signifies the current active mode

Timing buffer-cache reads: 1636 MB in 1.99 seconds = 822.11 MB/sec
Timing buffered disk reads: 92 MB in 3.01 seconds = 30.56 MB/sec

253:login:Penguin
05/05/09 12:41:07 eozLOQmT
Debian:~# /sbin/hdparm -tiT /dev/hda

/dev/hda:

Model=ASI ARAID99 1000 Ver1.00, FwRev=v1.00.47, SerialNo=A020-0272-14001-0000
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=unknown, BuffSize=0kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156301488
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:0,rec:0}
PIO modes: pio3 pio4
DMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no
Drive Supports : Reserved : ATA-1 ATA-2 ATA-3 ATA-4

Timing buffer-cache reads: 128 MB in 0.94 seconds =136.17 MB/sec
Timing buffered disk reads: 64 MB in 14.16 seconds = 4.52 MB/sec
Debian:~#

254:253
05/05/09 22:35:36 OMfmt8Sy
俺のは遅すぎたみたい。
家でﾊﾟﾗﾒﾀさわってみた

Debian:~# /sbin/hdparm -tiT /dev/hda

/dev/hda:

Model=ASI ARAID99 1000 Ver1.00, FwRev=v1.00.47, SerialNo=A020-0272-14001-0000
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=unknown, BuffSize=0kB, MaxMultSect=16, MultSect=8
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156301488
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:0,rec:0}
PIO modes: pio3 pio4
DMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no
Drive Supports : Reserved : ATA-1 ATA-2 ATA-3 ATA-4

Timing buffer-cache reads: 128 MB in 0.90 seconds =142.22 MB/sec
Timing buffered disk reads: 64 MB in 1.15 seconds = 55.65 MB/sec
Debian:~#

255: ◆Zsh/ladOX.
05/05/09 22:37:57 cpUgu9s8
漏れもそう思っていたが書かなかった(w

256:login:Penguin
05/05/28 22:44:11 RwCobzrw
Model=ST340015A, FwRev=3.01, SerialNo=5LAJT6PR
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=78165360
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2 udma3 udma4 udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version:

Timing cached reads: 112 MB in 2.01 seconds = 55.76 MB/sec
Timing buffered disk reads: 30 MB in 3.12 seconds = 9.63 MB/sec

なんでこんなに遅いんだろ・・・？
ファーヤーボールでも19MB/secまで出てたのに・・

257:login:Penguin
05/05/29 01:01:26 bkGVVj/s
$ sudo hdparm -tiT /dev/hda

/dev/hda:

Model=ST340810A, FwRev=3.39, SerialNo=5FB2VY20
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=78165360
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: unknown setting WriteCache=enabled
Drive Supports : Reserved : ATA-1 ATA-2 ATA-3 ATA-4 ATA-5 ATA-6

Timing buffer-cache reads: 128 MB in 2.07 seconds = 61.84 MB/sec
Timing buffered disk reads: 64 MB in 2.46 seconds = 26.02 MB/sec

このスレ見てDMAがOFFになってたのに気づいた。。。
何年気づかずに使ってたんだろう。。。orz

258:login:Penguin
05/05/29 04:30:50 Xq78Sccj
# /sbin/hdparm -itT /dev/hda

/dev/hda:

Model=ST340014A, FwRev=3.06, SerialNo=5JX6TNFS
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=78165360
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2:

* signifies the current active mode

Timing cached reads: 2088 MB in 2.00 seconds = 1044.16 MB/sec
Timing buffered disk reads: 166 MB in 3.03 seconds = 54.79 MB/sec

259:login:Penguin
05/06/13 07:36:33 P1YqOEF/
Model=HDS722525VLAT80, FwRev=V36OA63A, SerialNo=VN693ECFE0YJWD
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52
BuffType=DualPortCache, BuffSize=7938kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a:

* signifies the current active mode

Timing cached reads: 3596 MB in 2.00 seconds = 1797.37 MB/sec
Timing buffered disk reads: 176 MB in 3.01 seconds = 58.38 MB/sec

260:login:Penguin
05/09/22 20:08:11 sY542jwh
Model=WDC WD135BA, FwRev=16.13M16, SerialNo=WD-WMA02
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=40
BuffType=3(DualPortCache), BuffSize=2048kB, MaxMultSect=16, MultSect=16
DblWordIO=no, maxPIO=2(fast), DMA=yes, maxDMA=0(slow)
CurCHS=17475/15/63, CurSects=16513875, LBA=yes, LBAsects=26406576
tDMA={min:120,rec:120}, DMA modes: mword0 mword1 mword2
IORDY=on/off, tPIO={min:120,w/IORDY:120}, PIO modes: mode3 mode4

# hdparm -t /dev/hda
/dev/hda:
Timing buffered disk reads: 32 MB in 1.45 seconds =22.10 MB/sec

261:login:Penguin
05/10/03 03:41:14 l911Pi9+
# hdparm -itT /dev/hde

/dev/hde:

Model=IC35L060AVV207-0, FwRev=V22OA63A, SerialNo=VNVB01G2G5H4YE
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52
BuffType=DualPortCache, BuffSize=1821kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=120103200
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a:

* signifies the current active mode

Timing cached reads: 384 MB in 2.02 seconds = 190.13 MB/sec
Timing buffered disk reads: 72 MB in 3.05 seconds = 23.60 MB/sec

262:login:Penguin
05/10/03 03:42:24 l911Pi9+
# hdparm -itT /dev/hdf

/dev/hdf:

Model=HDS722516VLAT20, FwRev=V34OA6EA, SerialNo=VNR41EC4CR3P4M
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52
BuffType=DualPortCache, BuffSize=1794kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a:

* signifies the current active mode

Timing cached reads: 320 MB in 2.02 seconds = 158.36 MB/sec
Timing buffered disk reads: 92 MB in 3.01 seconds = 30.55 MB/sec

263:login:Penguin
05/10/04 02:51:11 ILOu3W4O
一つの外付けのケースに入れたドライブ（Toshiba MK8026GAX）を、

1). IEEE1394 で接続した場合

/dev/sda:
Timing cached reads: 528 MB in 2.01 seconds = 262.69 MB/sec
Timing buffered disk reads: 58 MB in 3.12 seconds = 18.59 MB/sec

と、

2). USB2.0 で接続した場合

/dev/sda:
Timing cached reads: 556 MB in 2.00 seconds = 278.00 MB/sec
Timing buffered disk reads: 36 MB in 3.05 seconds = 11.80 MB/sec

とで計測。

物理的にはまったく同じケース＋ドライブだけど、
接続方法が違うだけでこんなに違う。

ちなみに IEEE1394 は VIA OHCI Compliant IEEE 1394 Host Controller、
USB2 は NEC PCI to USB Enhanced Host Controller B1 の、
それぞれ PCI バスに刺したカード経由。

264:login:Penguin
05/10/08 22:24:48 1zbZptqU
2台でSoftware Raid0を組んでみた。

# hdparm -tT /dev/md0

/dev/md0:
Timing cached reads: 3560 MB in 2.00 seconds = 1778.49 MB/sec
Timing buffered disk reads: 412 MB in 3.01 seconds = 136.81 MB/sec

次ページ